Picoprobe® High Frequency/Microwave Probes and Probe Holders Picoprobe®

Add to Info Request List

Refer to the chart below to select the frequency range, and either active or passive RF/High Frequency probes.

Summary chart of the Picoprobe^® product line relative to frequency range.

Model	Description	Frequency Range	Tip Configuration	Manipulator & Link Arm	Cable	Connector Type
PP-7	drive IC - 50ohm terminated	dc	S	§	attached	BNC(m)
PP-7A	drive IC - not terminated	dc	S	§	attached	BNC(m)
PP-10	passive 50 ohm impedance 0.120"" tip	dc - 3.5GHz	GS	§	attached	SMA(m)
	passive 50 ohm impedance 0.030" tip	dc - 7GHz	GS	§	attached	SMA(m)
	passive 500 ohm resistance	dc - 11GHz	GS	§	attached	SMA(m)
	passive 250 ohm resistance	dc - 10GHz	GS	§	attached	SMA(m)
	passive 5000 ohm resistance	dc - 5GHz	GS	§	attached	SMA(m)
PP-12C	active probe requires power supply*	dc - 500MHz	S	§	attached	BNC(m)
PP-18C	active probe requires power supply*	dc - 350MHz	S	§	attached	BNC(m)
PP-19C	active probe requires power supply*	dc - 350MHz	S	§	attached	BNC(m)
PP-28	active probe requires power supply*	dc - 1GHz	S	§	attached	BNC(m)
PP-29	active probe requires power supply*	dc - 1GHz	S	§	attached	BNC(m)
PP-34A	active probe requires power supply*	dc - 3GHz	S	§	attached	SMA(m)
PP-35	active probe requires power supply**	dc - 26GHz	S	§	attached	SMA(m)
PP40	40A	dc - 40GHz	GS,GSG,SG	WAVE:PLF/PLS	C1	K(f)
PP40M	lower loss 40A	dc - 40GHz	GS,GSG,SG	WAVE:PLF/PLS	C1	K(f)
PP40AD	dual 40A	dc - 40GHz	GS,GSG,SG	WAVE:PLF/PLS	C1	K(f)
PP50BT	50BT with bias T	33 - 50GHz	GS,GSG,SG	WAVE:PLF/PLS	waveguide	WR22
PP50NB	50NB without bias T ***	33 - 50GHz	GS,GSG,SG	WAVE:PLF/PLS	waveguide	WR22
PP50A	50A	dc - 50GHz	GS,GSG,SG	WAVE:PLF/PLS	C2	2.4mm V(f)
PP67	67A	dc - 67GHz	GS,GSG,SG	WAVE:PLF/PLS	C2	1.85mm V(f)
PP75BT	75BT with bias T	50 - 75GHz	GS,GSG,SG	WAVE:PLF/PLS	waveguide	WR15
PP75NB	75NB without bias T ***	50 - 75GHz	GS,GSG,SG	WAVE:PLF/PLS	waveguide	WR15
PP90BT	90BT with bias T	60 - 90GHz	GS,GSG,SG	WAVE:PLF/PLS	waveguide	WR12
PP90NB	90NB without bias T ***	60 - 90GHz	GS,GSG,SG	WAVE:PLF/PLS	waveguide	WR12
PP110H	110H	dc - 110GHz	GS,GSG,SG	WAVE:PLF/PLS	call factory	1.0mm(f)
PP120BT	120 with bias T ***	75 - 120GHz	GS,GSG,SG	WAVE:PLF/PLS	waveguide	WR10
PP120NB	120 without bias T	75 - 120GHz	GS,GSG,SG	WAVE:PLF/PLS	waveguide	WR10
PP140BT	140 with bias T ***	90 - 140GHz	GS,GSG,SG	WAVE:PLF/PLS	waveguide	WR8
PP140NB	140 without bias T	90 - 140GHz	GS,GSG,SG	WAVE:PLF/PLS	waveguide	WR8
PP170BT	170 with bias T ***	110 - 170GHz	GS,GSG,SG	WAVE:PLF/PLS	waveguide	WR6
PP170NB	170 without bias T	110 - 170GHz	GS,GSG,SG	WAVE:PLF/PLS	waveguide	WR6
PP220BT	220 with bias T ***	140 - 220GHz	GS,GSG,SG	WAVE:PLF/PLS	waveguide	WR5
PP220NB	220 without bias T	140 - 220GHz	GS,GSG,SG	WAVE:PLF/PLS	waveguide	WR5
PP325BT	325 with bias T ***	220-325GHz	GS,GSG,SG	WAVE:PLF/PLS	waveguide	WR3
PP325NB	325 without bias T	220-325GHz	GS,GSG,SG	WAVE:PLF/PLS	waveguide	WR3

§ = May be mounted directly on the following manipulators: 110/210, 250/350, 450/550, 2450/2550, 525, 2525 and 900VM
* = 110VAC, 60Hz Power Supply (PP-PS-V1) or 220VAC, 50Hz Power Supply (PP-PS-V2)
** = 110VAC, 60Hz Power Supply (PP-P3-V1 or 220VAC, 50Hz Power Supply (PP-P3-V2)
*** = DC input is supplied through a female K connector
C1 = K connector or 2.92mm / 3.5mm (SMA) compatible
C2 = 2.4 connector or 1.85mm / V compatible
WAVE:PLF/PLS = Probe head is mounted to a link arm (PLS-8000 or PLF8000) on a microwave manipulator (WAVE100 or WAVE200). Direct mounting to a Wiltron module mounted on a special manipulator is another alternative.

Top

Back Information Request Page

Add to Info Request List