Probe Holders
Normal Probe Holders
Showing all 8 results
-
Mechatronics ACE Probe Holder (ACE-PRB-HLDR-M-X)
$355.00 – $550.00 (excl. 0% Tax)Mechatronics Products- Solid brass body with 4″ malleable center section
- Set screw probe tip clamp
- Great all purpose probe holder that fits most tester’s/analyzer’s
- Single wire terminates in banana plug or with banana to BNC Coaxial, & three lug Triaxial adapter
More Info -
72 Series Probe Holder
$385.00 (excl. 0% Tax)Probe HoldersProbe Holder, malleable with 2″ or 4″ inch shaft and set screw probe tip holder. call or e-mail us for details
More Info -
75-6000-R-XX Probe Holder
$420.00 (excl. 0% Tax)Probe HoldersLead wire terminates in a circular eye connector with an approximately 1/16 inch (1.6mm) hole for connection to measurement instruments. Total body length = 1-7/8”.
More Info -
75-8000-R-XX Probe Holder
$420.00 (excl. 0% Tax)Probe HoldersLead wire terminates in a circular eye connector with an approximately 1/16 inch (1.6mm) hole for connection to measurement instruments. Total body length = 3-1/8 ”. Total body drop (by bent body) = 1-1/4”.
More Info -
79-6000-R-03 Coaxial Probe Holder
$690.00 (excl. 0% Tax)Probe Holders30″ long signal wire with male coaxial connector for connection to measurement instruments. Total body length = 1-7/8”.
More Info -
High Power Probe Holders
$900.00 – $3,790.00 (excl. 0% Tax)Front, Probe HoldersWe can make mostly any high power probe. However, we have a series of probe holders designed to operate with most Keithley and Keysight power sources and analyzers.
More Info -
44-6000-S-NA Probe Holder with Integrated Tip
$620.00 (excl. 0% Tax)Probe HoldersIntegrated female SMA connector for connection to measurement instruments. Total body length = 1-7/8”.
More Info -
High Frequency Manipulators
$3,390.00 – $3,720.00 (excl. 0% Tax)Front, Probe Positioners / Manipulators- Left/right neutral
- Recommended for probing < 1-micron targets
- 100 TPI XYZ drive
- Vacuum, Magnetic, & Switchable Magnetic base
- Terminates in 3-hole mounting ledge with or without 90° angle for popular coplanar probe heads.
- Straight configuration for left/right manipulator placement.
- Supports GS, SG, GSG, and other popular probe head configurations.
- Planarity (Roll) adjustment = +/- 5-degree. Resolution = 0.005 degrees per degree rotation.
- Theta (Yaw) adjustment: Range = +/- 5 degrees. Resolution = 0.005 per degree rotation
More Info