Probe Positioners / Manipulators

Probe Positioners – Solutions to Meet Any Testing Needs

Micromanipulator offers a variety of probe positioners (manipulators) designed to meet personal preferences, application demands and budget needs. Our probe positioners range from our economy Model 110 manipulator right through to the multi-versatile WAVE manipulator. All of our manipulators provide the highest stability available on the market and feature direct leadscrew lead nut drives and ergonomic designs.

Please contact us if have any questions or need further information regarding our extensive selection of high-quality probe positioners, holders and tips.

Browse Our Probe Positioners/Manipulators

Showing all 6 results

425 Manipulators
$1,900.00 (excl. 0% Tax)
Probe Positioners / Manipulators
- Compact footprint
- Left/right neutral (all controls are rear of manipulator)
- True linear motion
- Recommended for probing < 1-micron targets
- 100 TPI XYZ drive
- Vacuum or Magnetic base
- Vacuum Manipulators come with 12″ vacuum tube and connector.
More Info
525 / 2525 Manipulators with Adjustable Nose Piece
$2,610.00 – $3,100.00 (excl. 0% Tax)
Probe Positioners / Manipulators
- Quickly lift & lower probes with “Quick-Z” feature
- Fully adjustable nose piece (rotate, height)
- Left/right neutral (all controls are rear of manipulator)
- True linear motion
- Recommended for probing < 1-micron targets
- 100 TPI (525) and 200TPI (2525) XYZ drive
- Vacuum or Magnetic base
- Vacuum Manipulators come with 12″ vacuum tube and connector.
More Info
High Frequency Manipulators
$2,860.00 (excl. 0% Tax)
Probe Positioners / Manipulators
- Left/right neutral
- Recommended for probing < 1-micron targets
- 100 TPI XYZ drive
- Vacuum or Magnetic base
- Terminates in 3-hole mounting ledge with or without 90° angle for popular coplanar probe heads.
- Straight configuration for left/right manipulator placement.
- Supports GS, SG, GSG, and other popular probe head configurations.
- Planarity (Roll) adjustment = +/- 5-degree. Resolution = 0.005 degrees per degree rotation.
- Theta (Yaw) adjustment: Range = +/- 5 degrees. Resolution = 0.005 per degree rotation
More Info
PPM203B
$3,500.00 (excl. 0% Tax)
Probe Positioners / Manipulators
- - 10 TPI XYZ drive
  - 14″ reach in X & Y
  - General-purpose benchtop positioner
  - Designed to hold a variety of hand held probes from makers such as, Tektronix, Fluke, Rhode & Schwarz, ThermoFisher, Keysight, Arrow
.

More Info
450 / 550 Series High or Low Profile Manipulators
$2,190.00 (excl. 0% Tax)
Probe Positioners / Manipulators

Left or Right handed (XYZ controls forward facing when placed on corresponding side of probing setup). Miniarc motion. Recommended for probing > 1-micron geometries. 100 T.P.I XYZ drive. Requires probe holder (order separately). High profile base for use on probe stations with the wafer chuck above the platen or low profile base for use on probe stations with the wafer chuck is below the platen. Vacuum Base manipulators require customer supplied vacuum.

More Info
Ace Manipulators
Request Quote
Probe Positioners / Manipulators

More Info

As you see from above, we have probe positioners to meet any budget or performance requirements. The economy Model 110 offers a low acquisition cost and small footprint for easy placement. Our medium range probe positioners offer industry leading flexibility and performance with 7 possible setup and positioning adjustments.

The Model 2525VM-2 has excellent COO for high-performance applications including sub-micron tests as well as a one-handed, left/right neutral operation. Our “Wave” series manipulators feature X-Y and Z leadscrew-lead nut control plus theta and planarity controls for alignment of microwave, multi-probe or mini-probe cards (such as Celadon’s “Versa Tile” and coplanar probes).

The probe positioners are stabilized by a vacuum or magnetic base and are used to support the probe holder. They are available in manual, motorized or programmable versions. Furthermore, to permit different probe holder shank widths to be firmly attached to the manipulator, a collet and collet shaft are used. At Micromanipulator the collet shafts are included with our manipulators and applicable collets are included with probe holders.

Please contact us if have any questions or need further information regarding our extensive selection of high-quality probe positioners, holders and tips.

At Micromanipulator we not only invented analytical probing in 1956 but are the leading name in the field. We expertly deliver the tools and life cycle support the semiconductor industry depends on. Part of our company’s philosophy and what drives our success is an unfaltering commitment to our customers’ satisfaction. You will find just what you need with our comprehensive range of probe holders, tips, and probe positioners.

Probe Positioners / Manipulators

Probe Positioners – Solutions to Meet Any Testing Needs

Browse Our Probe Positioners/Manipulators

425 Manipulators

525 / 2525 Manipulators with Adjustable Nose Piece

High Frequency Manipulators

PPM203B

450 / 550 Series High or Low Profile Manipulators

Ace Manipulators

System Control

System

System Capability

Manipulator Type

Probe Holder Type

Value Considerations

Thermal Chuck Type

Probe Tip Type